Heavy-duty CV Joints, Half Shafts & Drive Flanges
Parts
XS Front Heavy-Duty CV Joint Kit (DA3919)
Kit Contains:
TDJ000010 HD CV Joint x 2
STC3435S Swivel Housing Grease x 2Front Heavy-Duty CV Joint (TDJ000010HD)
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to this robust CV joint to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
CV Joints are one of the most critical components in the entire drivetrain. These are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes. They have enhanced toughness and resistance to shock loads and are designed to complement the XS heavy-duty shafts.
Britpart heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
Backed by a 5-year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD CV Joints offer peace of mind to all off-road enthusiasts.
XS Front Heavy-Duty CV Joint Kit (DA3856)
To fit this CV joint to a late axle you would need to change to early hubs, stub axles and drive flanges.
Kit Contains:
RTC6862HD CV Joint x 2
STC3435S Swivel Housing Grease x 2XS Front Heavy-Duty Axle Shaft Kit (DA3857)
TDC000020HD Axle Shaft - RHS x 1
TDC000030HD Axle Shaft - LHS x 1
STC3435S Swivel Housing Grease x 2
XS Rear Heavy-Duty Axle Shaft Kit (DA3858)
FTC1724HD Axle Shaft - RHS x 1
FTC1725HD Axle Shaft - LHS x 1
XS Rear Heavy-Duty Axle Shaft Kit (DA3859)
TOB500020HD Axle Shaft - RHS x 1
TOB500030HD Axle Shaft - LHS x 1
XS Rear Heavy-Duty Half Shaft (FTC1724HD)
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to robust shafts and CV joints to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of half shafts and CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
Both front and rear half shafts are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes.
CV Joints are one of the most critical components in the entire drivetrain. Machined from SAE4340 chromoly material, they have enhanced toughness and resistance to shock loads and are designed to complement the heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart XS heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
All heavy-duty shafts are compatible with 24 splines differentials.
Backed by a 5 year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD half shafts and CV Joints offer peace of mind to all off-road enthusiasts.
XS Rear Heavy-Duty Half Shaft (FTC1725HD)
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to robust shafts and CV joints to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of half shafts and CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
Both front and rear half shafts are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes.
CV Joints are one of the most critical components in the entire drivetrain. Machined from SAE4340 chromoly material, they have enhanced toughness and resistance to shock loads and are designed to complement the heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart XS heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
All heavy-duty shafts are compatible with 24 splines differentials.
Backed by a 5 year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD half shafts and CV Joints offer peace of mind to all off-road enthusiasts.
XS Front Inner Heavy-Duty Half Shaft (TDC000020HD)
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to robust shafts and CV joints to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of half shafts and CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
Both front and rear half shafts are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes.
CV Joints are one of the most critical components in the entire drivetrain. Machined from SAE4340 chromoly material, they have enhanced toughness and resistance to shock loads and are designed to complement the heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart XS heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
All heavy-duty shafts are compatible with 24 splines differentials.
Backed by a 5 year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD half shafts and CV Joints offer peace of mind to all off-road enthusiasts.
XS Front Inner Heavy-Duty Half Shaft (TDC000030HD)
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to robust shafts and CV joints to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of half shafts and CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
Both front and rear half shafts are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes.
CV Joints are one of the most critical components in the entire drivetrain. Machined from SAE4340 chromoly material, they have enhanced toughness and resistance to shock loads and are designed to complement the heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart XS heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
All heavy-duty shafts are compatible with 24 splines differentials.
Backed by a 5 year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD half shafts and CV Joints offer peace of mind to all off-road enthusiasts.
XS Rear Heavy-Duty Half Shaft (TOB500020HD)
Can be fitted to Defender 90 - 1994 - 2004 models if outer drive flanges are changed to later type.
Can be fitted to Discovery 1- 1994 - 1998 & Range Rover Classic - 1992 - 1994 if outer drive flanges are changed to late Defender type.
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to robust shafts and CV joints to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of half shafts and CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
Both front and rear half shafts are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes.
CV Joints are one of the most critical components in the entire drivetrain. Machined from SAE4340 chromoly material, they have enhanced toughness and resistance to shock loads and are designed to complement the heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart XS heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
All heavy-duty shafts are compatible with 24 splines differentials.
Backed by a 5 year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD half shafts and CV Joints offer peace of mind to all off-road enthusiasts.
XS Rear Heavy-Duty Half Shaft (TOB500030HD)
Can be fitted to Defender 90 - 1994 - 2004 models if outer drive flanges are changed to later type.
Can be fitted to Discovery 1- 1994 - 1998 & Range Rover Classic - 1992 - 1994 if outer drive flanges are changed to late Defender type.
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to robust shafts and CV joints to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of half shafts and CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
Both front and rear half shafts are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes.
CV Joints are one of the most critical components in the entire drivetrain. Machined from SAE4340 chromoly material, they have enhanced toughness and resistance to shock loads and are designed to complement the heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart XS heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
All heavy-duty shafts are compatible with 24 splines differentials.
Backed by a 5 year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD half shafts and CV Joints offer peace of mind to all off-road enthusiasts.
Front Heavy-Duty CV Joint (RTC6862HD)
The combination of intense tyre patterns, increased engine power, and axle differential locks, not to mention the healthy dose of competitive spirit often leads to wear and tear of standard driveline components. Upgrade today to this robust CV joint to help tackle challenging terrain and outperforming the competition.
Due to limitations in space with standard axles, simply increasing the size of CV joints is not always possible. As a result, the focus shifts to enhancing material specifications and advanced heat treatment processes to ensure resilience and performance.
CV Joints are one of the most critical components in the entire drivetrain. These are constructed from steel alloy with a high percentage of nickel - chromoly - molybdenum specifically SAE4340. After passing through a 3-stage heat treatment process, these components acquire the necessary properties to withstand off-roading adventures whilst minimising stress on other driveline elements including differentials and transfer boxes. They have enhanced toughness and resistance to shock loads and are designed to complement the XS heavy-duty shafts. Ensuring optimal performance, developed to incorporate 30mm centre with 23 splines.
Britpart heavy-duty shafts and CV joints serve as direct replacements for original components, allowing drivers to upgrade individual or multiple driveline parts.
Backed by a 5-year limited warranty, subject to authorisation and a maximum tyre diameter of 35’’ these HD CV Joints offer peace of mind to all off-road enthusiasts.
Drive Flange Bolt Caps (DA2989)
Heavy-Duty Drive Flange (DA1148)
These heavy-duty drive flange kits have been engineered to outperform many of the inferior products available on the market. Manufactured from chromoly steel - 40CrNiMo to they are much stronger than an OE drive flange. Complete with hex head bolts and screw on caps with integral seal.
Replacement Drive Flange Cap With Rubber Seal (DA1148CAP)
Heavy-Duty Drive Flange (DA1149)
These heavy-duty drive flange kits have been engineered to outperform many of the inferior products available on the market. Manufactured from 5140 steel to they are much stronger than an OE drive flange. Complete with hex head bolts and screw on caps with integral seal.
Replacement Drive Flange Bolt Set (DA1128)
Replacement Heavy-Duty Drive Flange (RUC105200HD)
Replacement Heavy-Duty Drive Flange (FRC5806HD)
