Bush Tools
A selection of tools to help you remove and install your Land Rover's bushes.
Parts
Knuckle Ball Joint Tool (DA1303)
For the removal and fitting of bushes and ball joints, without having to remove suspension legs, subframes, wishbones, trailing arms etc from the vehicle. Designed to be used in-situ, although many can also be used in a workshop press if circumstances require.
This kit has been designed to allow the top and bottom steering ball joints fitted to the Discovery 2 & Range Rover P38 - upper and lower ball joints - to be replaced with the axle casing attached to the vehicle. Equivalent to OEM 205-718, 205-732, 205-733, 205-719, FTC3570 & FTC3571. Use with ratchet ring spanner - flexi head 19mm.Rear Axle Carrier (Sub-Frame) Bush Tool (DA3854)
Used to extract and insert the sub-frame (differential carrier) to body bushes without dropping the sub-frame from the vehicle
Bush Kit Tool (DA2883)
This tool has been developed to allow the user to safely remove and replace the rear hub bottom bush. The toolhas s been specifically designed for use with minimal strip down of the vehicle components for the removal and replacement of the bush.
- Removal and fitting of the rear hub lower bush
- Use on vehicle with the minimum of suspension dismantling required
- For use with hand tools only
- Made in Sheffield
- Uses a mechanical force screw.
Always ensure the force screw is clean and lubricated with molybdenum disulphide grease.
Bush Removal & Installer Tool (DA7464)
Designed for OEM bush RHF500100. Can be used in situ which saves time and reduces the dismantling required.
Bush Removal & Installer Tool (DA7461)
For use with RBX500291. Can be used on the vehicle saving time and money.
Bush Fitting Tool (LRT-60-004)
Fitting new front radius arm bushes (part number ANR3332) for the Range Rover P38A is impossible to do without using the Land Rover special tool.
Bush Removal & Installer Tool (DA7466)
The lower hub bush tool DA7463 and the upper hub bush tool DA7466 have been developed to allow the technician to remove and refit these rear suspension bushes with the minimum of dismantling required. Being able to perform the task on the vehicle saves considerable time over the more traditional use of a workshop press and the requirement that the hub be completely removed.
For reference, the DA7463 bush tool (OEM equivalent 204-516) has been specifically designed to work with OEM bush RBK500220, and the DA7466 bush tool (OEM equivalent 204-515) has been specifically designed to work with OEM bush RHF000260.
Bush Removal & Installer Tool (DA7465)
Designed to remove and refit the front suspension bush of the lower arm with the minimum of dismantling.
Bush Removal & Installer Tool (DA7463)
The lower hub bush tool DA7463 and the upper hub bush tool DA7466 have been developed to allow the technician to remove and refit these rear suspension bushes with the minimum of dismantling required.
Being able to perform the task on the vehicle saves considerable time over the more traditional use of a workshop press and the requirement that the hub be completely removed.
For reference, the DA7463 bush tool (OEM equivalent 204-516) has been specifically designed to work with OEM bush RBK500220, and the DA7466 bush tool (OEM equivalent 204-515) has been specifically designed to work with OEM bush RHF000260.