General Workshop Tools
A selection of tools for working on your Land Rover
Parts
Laser Rechargeable Hot Blade Scraper (DA7322)
Powered by a 2400mAh li-ion battery, it features a charge level indicator, magnetic base and two built-in LED lights to help with precision work or use in dimly lit areas. It reaches a maximum temperature of 230C, with an approximate run time of 35 minutes and a charging time of 2.5 - 3 hours. Supplied with mains charger, UK 3-pin and 2-pin Euro plug adaptor, spare blade and blade holder. CE compliant.
Laser Metal Skin & Trim Clip Wedge Tool - 50th Anniversary (DA7320)
Manufactured from SCM440 steel with a satin finish, it features a fine flat blade at one end and a curved rounded blade at the other. It can also be used to wedge between sheet metal components, such as sumps, to allow access for larger levers, and is suitable for use on plastic sumps and cam covers. Length: 127mm. Width: 15mm. Blade taper: 0.4 - 2.2mm. Hardness: HRC42-50. Produced as part of Laser Tools' 50th Anniversary range, this trim wedge tool is supplied with a 50-year warranty.
Laser Fast Repair Tyre Plugs (DA7324)
The fast repair plug simply screws into the hole left by a nail or screw, then snaps off flush with the tyre. No glue is required, making it simple and convenient to use. The kit includes four large hard plastic tyre plugs and a steel nail extractor lever with a powder-coated finish. Each plug has a 28mm insertion length and a tapered 4mm thread core diameter. The plug handles also feature a built-in tread depth gauge.
Laser Large Jaw Locking Pliers (DA7321)
Suitable for use by mechanics and welders, they feature a wide adjustable opening, one-handed release mechanism and soft-grip handle for ease of use. A large knurled adjustment screw provides improved grip and control. Length: 305mm. Jaw opening: 65mm. Manufactured from chrome molybdenum with a heat-treated body.
Laser Backpack - 50th Anniversary (DA7318)
Ideal for mechanics and DIY users. It features a wide-opening zipped main compartment with 11 elasticated internal pockets for organised storage. Additional storage includes 2 zipped external pockets for documents, phones and personal items, plus 2 mesh side pockets. It also features adjustable shoulder straps, standard carrying handles, raised foot pads and a reinforced base. Manufactured from durable 400/1680D polyester for strength and wear resistance. Launched as part of Laser Tools' 50th Anniversary range and supplied with a 50-year warranty.
Dimensions: 310 x 180 x 410mm.
Capacity: 23L.
Maximum load: 15.8kg.
Empty weight: 1.2kg.
Laser Internal/External Pipe Deburring Tool (DA7341)
Ideal for use on steel, copper-alloy and aluminium pipes or tubing from 4-14mm in diameter. The double-ended design provides internal and external deburring in one compact handheld tool. It features an ergonomic handle and a retractable countersink blade for safer storage, locking securely in place with a knurled knob. Ideal for brake pipe repair, workshop use, plumbing, mechanics and DIY jobs.
Laser Diesel Pump Sprocket Puller (DA7586)
From 2011, the method of removing the fuel pump sprocket changed. This tool enables the pump removal without removing the timing chain; works in conjunction with DA7585. Equivalent to puller bridge from OEM 303-249 and puller leg kit 303 249-01.
Laser Fuel Injection Pump Sprocket Locking Tool (DA7585)
Designed to allow the removal of the chain driven high pressure diesel injection pump without removing the timing chain or disturbing the engine timing. Equivalent to OEM 303-1317.
Laser Suspension Split Hub Knuckle Spreader (DA7592)
Compact hub clamp spreader tool designed to hold suspension split hubs open for easier removal and fitting of suspension struts. Features a double-ended design for use on both larger upper split hubs and lower ball joint split hubs without risk of damage. Maximum opening - approx. 15mm. For use with 10mm hand tools only - max torque 13Nm.
Stud Kleen (DA3599)
Stud Kleen attaches firmly to a standard impact wrench, providing the fastest and safest cleaning solution for your wheel changing process. Aluminium ring to support 1/2” drive at higher torque/speed. Purple abrasive material has a height of 1/4” to extend deeper down the thread and closer to the hub.
Laser Airblow Gun (DA7706)
Kit consisting of a sturdy gun and trigger body with a quick release button to allow the nozzles to be swapped over quickly and easily.
Supplied with:
1 x straight flexible nozzle - ensures the air can be directed off-line
1 x flexible side blow nozzle - ideal for blowing air into barrels, tubes, & air filtersNozzle material: oil resistant, flexible PU rubber mounted on hard wearing rigid plastic extensions.
Thread: 1/4” BSPT
Working pressure: 110psi
Max pressure: 220psi.
Laser Long Reach Air Cut-Off Tool (DA7343)
Ideal for cutting exhausts, brackets, axle U-bolts, and door sills.
- For use with 75mm cutting discs (1 disc included)
- Protective 360° rotating safety guard
- Low vibration (3.1m/s²) and soft-grip handle to reduce fatigue
- Safety trigger to prevent accidental start
- Free speed: 18,000rpm
- Air consumption: 3.0cfm
- Air pressure: 90psi
- Air inlet: 1/4” BSP
Multi-Channel Automotive Noise Finder (DA5235)
Can be used on chassis and suspension assemblies as well as engines, alternators, gearboxes and differentials.
- Electronic noise & vibration diagnosis kit.
- 1 channel = stethoscope, 4 channels with wired alligator clip style pickups.
- Ideal for tracing chassis & suspension noises caused by worn bushes, ball joints, wheel bearings, gear box bearings, differential bearings, etc.
- Engine noises that can be traced include valve clearance, flywheel noises, clutch release bearings, bottom end bearings, alternator/dynamo bearings.
- Powered by 3xAA batteries (not included). CE compliant
Laser Window Regulator Wrench (DA5189)
A hook wrench intended for use on the window winding mechanism, fits between the door glass and the exterior seal. Allows window regulator setting & adjustment.
Laser Ball Joint Separator (DA4979)
A heavy duty ball joint separator tool, this scissor type design enables the ball joint to be eased apart and released, impact free.
Manufactured from heat treated 45 carbon steel.
- Inner opening - 31mm
- Outer opening - 52mm
- Upper jaw length - 215mm
- Lower jaw length - 220mm
- Weight 3.7kg
Gear Shift Module Lifting Gear Levers (DA3853LEVER)
Gear Shift Module Tester (DA3853)
Gear Shift Module Tester
The plastic fastener in the GSM can break or become damaged, rendering the GSM unusable. Britpart’s GSM Tester Kit includes durable metal fasteners for replacement. After repairing, the tester allows you to check the GSM without reassembling it into the vehicle, saving time on unnecessary disassembly.
Common Failure Symptoms:
- Gear selection dial won’t rise, fall, or rotate.
- Fault code: P176C-11 - Transmission Range Selector Lock Control Error.
Functions:
- Adjust GSM position without attaching it to the vehicle.
- Automatically identifies vehicle model, reducing diagnosis time.
- Simple one-button operation for position adjustment and gear switching.
Kit Includes:
1 x Main Tester
1 x 12 & 22pin Cable
2 x Lifting Gear LeversLaser Easy Flow Pump (DA3963)
It features a D-shaped handle, for easy down stroke, 50” PVS hose with an internal wire spring to help reduce kinking, and a curved aluminium spout. Features a nylon upper pump body, with steel tube, aluminium spout & 1,270mm PVC hose. Flow rate: 70cc per stroke. Designed to fit 2¼” threaded drums. Also supplied with 88RA drum adaptor, for use on 20L plastic oil drums. Can also be used with Laser thread adaptor kit - DA1842.
Oil Spill Kit (DA3954)
Kit Includes
- 2 x Super Absorbent Pads
- 4 x Nitrile Gloves
- 4 x Dirteeze Hand Wipes (2 x twin pack)
- 1 x Disposal Bag
- 1 x Bag Tie
This small spill kit has been designed for use in motorsport field and complies with the latest Motor Sport UK regulations. The kit, which is to be carried in all competing vehicles, will absorb a wide range of automotive fluids such as petrol, diesel, lubricating oils, hydraulic liquids and coolants.
Laser Drip Tray (DA1928)
Large plastic drip tray, with a low profile (19mm deep), that easily slides under the vehicle to protect the floor against oil and fluid drips, ideal for use under any vehicle that is stood for long periods.
Manufactured from oil and fuel resistant plastic with a corner spout for ease of emptying. A simple solution for keeping floors clean during oil changes and minimising slip hazards. Tray size - 609 x 457 x 19mm
Laser Fork Ball Joint Separator (DA1848)
For separating ball joints, this tool uses the forked wedge principle. Designed to be used with a hammer separate the joint from the steering arm. Manufactured to ANSI and DIN standards.
Laser Camshaft Sprocket Holding Tool (DA1770)
A multi-application wrench with variable adjustment. Reduces potential damage to camshaft. Designed to allow the sprocket to be held still whilst undoing fixings.
Laser Damaged Hex Bolt Extractor (DA7355)
Sizes: 1.5, 2, 2.5, 3, 4, 5 & 6mm x 50mm long. 1/4” shank with quick chuck end.
Packed in a storage case.
For use with a drill.
Laser Flange Holding Tool (DA3898)
Used to hold the flange whilst removing and replacing the flange nut on JLR 5.0 and 3.0 diesel engines. Equivalent to OEM 205-053.
Laser Hose Clamp Tool - Bar Type (DA1765)
Suitable for use on rubber hoses, making it ideal for both brake and fuel lines together with coolant hoses. Steel construction with round chrome plated bars to help prevent damage.
- Clamps any hose simply and effectively
- Chrome plated bars
- Use on brake, fuel and heater hoses
- No sharp edges
- Ensures complete clamp
Norma® Fuel Line Repair Kit (DA3611)
- Economical solution to repair defective spots instead of replacing complete fuel lines Access to OEM quality materials
- Easy identification of the components within the kit with the help of product descriptions
- Standard quick connector spigot connection as per SAE J2044
Safety aspect:
- NORMAQUICK® S connector cannot be opened under pressure
- Very high pull-off forces of quick connectors due to four locking arms ABA Mini provides excellent clamping force compared to screwless clamps
The kit contains:
Qty x 2 - S NW 3/8” - 5/16” - 0° | Adapter
Qty x 2 - S NW 5/16” - 6mm - 0° | Adapter
Qty x 2 - S NW 5/16” - 6mm - 0°
Qty x 2 - S NW 5/16” - 6mm - 90°
Qty x 1 - S NW 9.89mm - 8mm - 0°
Qty x 1 - S NW 9.89mm - 8mm - 90°
Qty x 2 - S NW 3/8” - 5/16” - 0°
Qty x 2 - S NW 3/8” - 5/16” - 90°
Qty x 4 - Sleeve - Ø 6 mm
Qty x 4 - Sleeve - Ø 8 mm
Qty x 2 - Rubber hose - ID 8 mm
Qty x 2 - Rubber hose - ID 10 mm
Qty x 8 - ABA Mini 14/9 W4
Qty x 8 - ABA Mini 16/9 W4Drain Plug Removal Tool (DA5443)
Slotted oil drain plug tool. For use with a 19mm spanner or socket.
Laser Hub Puller Adaptor Kit (DA3524)
- PCD 97 - 123mm
- Complete with 5/8”UNF adaptor for slide hammer
- 1½” x 16tpi plate thread allows use of hydraulic ram
- Can also be used with an impact force screw
Laser Automatic Gearbox Alignment Tool (DA3499)
An essential tool for the correct setting and alignment of the XYZ switch (gear selector position and starter inhibitor switch) on the ZF4HP22, ZF4HP24, ZF4HP44 automatic gearboxes. Equivalent to OEM 307-498 & LRT-44-011. Made in Sheffield.
Laser Airbag Removal Tool (DA7362)
Designed to release the driver airbag module from the steering wheel.
Equivalent to OEM 501-106
Laser Balance Shaft Removal & Installation Kit (DA3247)
Designed to allow the safe removal, fitting and timing of the gear driven balance shaft on the Jaguar Land Rover AJ200 2.0 diesel engines.
The kit contains all the essential components to enable the balance shafts to be aligned when reassembling the components. Made in Sheffield.
Use in accordance with OEM instructions.
Equivalent to OEM JLR-303-1662 / JLR-303-1663-1 JLR-303-1663-2 / JLR-303-1663-3 JLR-303-1664 / JLR-303-1665
Laser Long Series Hex Bit D 11mm (DA3248)
Ideal for injector clamp bolts and caliper bolts. Size: 11mm x 100mm long. Socket manufactured from Chrome Vanadium. Bit from S2 Steel.
Laser Exhaust Gas Temperature Sensor Socket (DA7399)
Required to remove/install the exhaust gas temperature sensor. Equivalent to OEM 303-1573. 13mm hex x 6mm deep. Socket equipped with a 13mm hex to use with appropriate spanner or wrench. Made in Sheffield.
Automotive Current Tester LCD Display (DA1650)
This automotive current tester with LCD display, plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections. Blades may get hot during use and care should be taken for 2mins whilst they cool down.
- Fits mini and maxi fuses
- Current range 0-80A
- Safe and easy way to check automotive current LCD display
- Hold and peak function with bar graph
Automotive Current Tester (DA7288)
The tool plugs straight into the vehicles fuse board and displays the current on the large LCD display.
- Specification range 0-48 volt max 20 amps, 12v battery included.
- Quick and safe
- Plugs straight into the vehicle fuse board
- Large LCD display
- Specification range 0-48volt max 20 amps 12v battery included
Laser Differential Pinion Holder & Wrench Set (DA2799)
Applications include:
- Range Rover - 2013 - 2016
- Range Rover Sport - 2014 - 2016
Pinion Nut Wrench also suitable for:
- Discovery - 2017 - 2019
Equivalent to OEM JLR-205-994, JLR-205-996
Refer to OEM instructions for torque setting
Laser Short Circuit Diagnostic Kit (DA7487)
Tracing a short circuit can be a very time consuming exercise. This Short Circuit Diagnostic Kit provides the solution in the form of a set of circuit breaker fuses that are designed to fit in place of the traditional fuse. The circuit breaker will safely break the circuit when an overload is detected just like a conventional fuse but unlike a conventional fuse it is manually resettable allowing the technician to reset the circuit breaker fuse to run their tests as many times as they need.
The kit provides resettable fuses for both standard and mini size blade fuses. Where space is really tight the set includes two 300mm extension leads which allow the circuit breaker fuse to be connected where space in the fuse box is tight.
- Contents includes: 7 standard blade manually resettable circuit breaker fuses & 7 mini blade manually resettable circuit breaker fuses.
- Fuse ranges: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- 300mm (12") extension loop leads for better access for use with both blade sizes.
Laser Breaker Bar With Built-In Impact System (DA7490)
330mm long breaker bar with built in impact system allowing the bar to be loaded with one hand and then impacted with a hammer for significantly increased force. Ideal where air tools are not an option.
- Bi-directional for removing left or right handed stubborn nuts and bolts using combine hand and impact force.
- Swivel head gives access to difficult areas.
- Use with impact socket and bits.
- 330mm long x 1/2" drive.
- Impact absorbing composite grip handle
Laser Impact Twist Sockets (DA7489)
Ideal for removing damaged nuts and bolts. Impact twist socket 1/2" D, manufactured from SCM440 steel.
- Sizes: 17mm, 18mm, 19mm, 21mm, 22mm, 24mm.
- 1/2" drive.
- Supplied in EVA foam for tool box storage.
- Manufactured from SCM440 steel with black finish.
- Special profile for removing damaged nuts and bolts.
Laser Torx Fixing Extractor Set - 11 Piece (DA1875)
- Manufactured from S2 silicon steel
- 7 x Extractors with 6mm Hex drive (quick chuck) Sizes - E10, E15, E20, E25, E27, E30, E40
- 3 x Extractors with 10mm Hex drive Sizes - E45, E50, E55.
- 1/2" D x 10mm Hex adaptor
- Storage case
Laser External Deburr/Chamfer Tool (DA1877)
External deburr/chamfer tool fitted with HSS blade for repairing damaged bolts. Effective on Stainless Steel, hardened steel, mild steel, copper, brass, wood, fibreglass, hard plastic.
- Size range 3 - 19mm
- Speed 0 - 400rpm
- High Speed Steel blade 1/4" shank
In a busy workshop there are numerous instances of threads getting damaged: whacking a track rod end with a hammer; cutting a bolt or threaded rod - the threaded ends get torn and squashed. Wheel studs get damaged just by removing and refitting the wheels¦ Luckily there is a quick and easy solution - the external deburr & chamfer tool.
The chamfer tool is designed to be used with an electric drill and is fitted with a 1/4" quick-chuck shaft, maximum recommended speed is 400rpm. The tool is fitted with three super-hard High Speed Steel blades that make light work of repairing damaged bolts and damaged threads. The blades cut quickly and cleanly and are effective on stainless steel, hardened steel, mild steel, copper, brass, wood, fibreglass, and even hard plastic. Bolts, studs and threaded rod, size range from 3mm right up to 19mm. Hammer-damage or squashed and flattened threads will stop the retaining nut or wheel nut screwing back on; a couple of zaps from the deburr/chamfer tool solves the problem instantly. Cutting steel or copper pipe can leave an uneven edge that can stop an olive or tube nut being slid on. A gentle touch with the tool leaves a nicely chamfered edge, and the olive slides straight on.
Laser Damaged Nut/ Bolt Extractor Set - 12 Piece (DA1878)
This kit is made up of a set of cleverly designed hexagon bolt and nut extractor adaptor caps. The caps fit over the rounded off fixing and allow a standard 12 point socket or ring wrench to be used to remove the rounded off hexagon fitting.
- Sizes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm.
- For use with 12 point sockets and wrenches.
- Specially hardened steel components finished in black.
- Can be used on up to 65% rounded nuts.
- Due to material used, the tools should be considered consumable. Following the instructions for use will help significantly increase the service life of the kit.
The "rounded-off" nut or bolt is the scourge of the mechanical workshop. Particularly on exhaust components, a corroded and seized nut or bolt defies all attempts to remove it, and if using a spanner or ill-fitting socket, the flats of the fastener soon get rounded-off, making things worse. What to do?
Well, you could get out the angle grinder or better still, reach for this ingenious new Damaged Nut/Bolt Extractor Set. These specially hardened caps fit over the rounded off fixing and allows a standard 12 point socket or ring spanner to be used to remove the rounded off fastener. The extractor cap grips and moulds itself to the rounded-off fastener and keeps on gripping until it loosens off.
Laser Damaged Cap Head Bolt/Screw Extractor Set - 11 Piece (DA1876)
- 7 x 1/4" Hex shank Sizes - 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm x 50mm long.
- 3 x 10mm Hex shank x 7mm, 8mm, 10mm x 38mm long.
- 1/2" D x 10mm Hex adaptor
- Storage case
Laser 10W Under Bonnet Compact Work Light (DA7588)
An under-bonnet bar style COB light that features angle adjustable magnets at both ends to allow easy attachment to steel bonnets and vehicle under body. It also includes two hanging hooks for added convenience. The 500mm long light has a built-in selectable infrared “wave” sensor function allowing the user to switch the light on or off with just a wave.
- Ideal for hand held or hands-free use, the magnetic ends can be angled to allow the torch to be securely attached to any ferrous surface
- 40 x 40 x 500mm / 455g
- Switch mode: COB on low (500 lumens), COB on high (1000 lumens) & Off
- Features additional infrared function to turn light on & off with a wave
- Working time: 2 - 5 hours - approx.
- Charging time: 3.5 - 4 hours - approx.
- Powered by the built in 3.7V 4400mAh Li-ion battery.
- Rechargeable from USB-C charging cable (included).
- Overcharge & discharge protected.
- Manufactured from ABS plastic. IP20 & IK07 rated.
- CE & RoHS compliant
Laser Heat Shield Repair Discs (DA7591)
Exhaust under body heat shields have an annoying habit of failing around the area of their fixing point leading to rattling noises. The heat shields are usually still serviceable but their mounting holes will have become too big for the clamping washers to fix them in place. This kit provides a 52mm diameter disc of heat shield material to allow the original shield to be repaired and reused when used in conjunction with a heat shield retaining washer.
Laser Butane Hot Air Blow Gun (DA7589)
A butane gas powered hot air blower with piezo electric ignition. It features a safety lock, to prevent accidental ignition, together with a flame lock to allow for continuous use. The refillable gas tank has a 30ml capacity, and can only be refilled by removing it from the gun to prevent accidental ignition. It has a run time of 40 - 60 minutes and a maximum temperature of 600°C. Suitable for use at the workshop, at home and in the garden, for a wide range of tasks including heating seized components & paint-stripping. Butane lighter gas not included.
Laser Fuse Terminal Cleaning Kit (DA7587)
A 3 piece set of double ended fuse removal tools, that each combine an automotive blade type fuse extractor, with a diamond coated terminal cleaner designed to quickly remove any corrosion from the terminal to ensure a good connection. It includes sizes to suit standard, mini and micro 2 blade fuses.
- For the easy removal of the fuse from a holder or the vehicles fuse box
- Abrasive terminal cleaners to eliminate corrosion & ensure a strong connection
- Hard diamond coating for effective use & durability
- Dual colour plastic handles, with a textured grip for ease of use
- UK Registered Design
Laser Multi-Head Ratchet Spanner Set (DA7590)
An innovative flexible headed spanner handle with 12 interchangeable ratchet ring spanner heads from sizes 8mm up to 19mm. Manufactured from chrome vanadium, fitted with a soft grip handle for ease of use, with the ratchet heads each featuring a 72 teeth mechanism for fast engagement and ideal for use in confined spaces.
- Flexi-head ratchet spanner handle with 12 interchangeable heads, ideal for use in confined areas
- Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
- 72 teeth ratchet spanners, Bi-Hex (12pt) ratchet ring. Max torque load: 150Nm (110lb-ft)
- Manufactured from heat treated chrome vanadium (50BV30), with a chrome plated finish
- Supplied on a hanging rack, ideal for workshop wall storage
Laser Thread Adaptor (DA1842)
Two adaptors for use with DA3963 Easy Flow Pump.
Suitable for use with engine oil, gear oil, diesel and anti-freeze. Specifically designed to convert the female thread (DIN 61mm) drum pump 57mm (M) + 2" BSP (M) adaptor.
Laser Glow Plug Compression Adaptor Kit (DA1839)
A selection of diesel glow plug compression test adaptors specifically designed to allow Laser diesel compression testers (4510 & 2596) and cylinder leakage tester (5140) to be used on the current range of Jaguar & Land Rover diesel engines including the 2.2 TD4, TDV6, TDV8 and the latest Ingenium engines.
The kit includes a specially designed 90 degree connector to allow access on TDV6 engines where the oil filter obstructs normal access.
- 3 glow plug adaptors for compression and cylinder leakage testing.
- Equivalent to OEM 60228, 60229, 60232.
- Designed to be used with Laser Compression & Cylinder Leakage testers.
- Part Nos. 4510, 2596, 5140.
Laser Front Lower Ball Joint Tool (DA1840)
Allows the bottom ball joint to be replaced and fitted without removing the lower wishbone assembly
- Designed for use on the vehicle saving significant time and additional parts costs
- Equivalent to OEM 204-531
- Always lubricate the force screw with molybdenum disulphide grease
Laser Differential Pinion Shaft Holding Tool (DA1844)
A 2 piece kit providing the special pinion nut holding tool and splined deep socket to allow the removal and installation of the rear differential pinion shaft nut when rebuilding the rear differential in accordance with Land Rover OEM instructions.
- A two-piece kit including Bi-Hex pinion nut holding tool and splined socket.
- Use with suitable torque wrench with a 250Nm minimum capacity.
- Equivalent to OEM tool JLR-205-984.
Steering Drop Arm Puller (DA1749)
Designed for the removal of the steering drop arm from the steering box.
The Defender steering drop arm can wear because of its position low down at the front of the chassis — it’s exposed to all the road spray and water that gets thrown at it. Water gets into the joint and eventually you will have to replace the drop arm and ball joint because the rust has corroded it. However splitting the steering drop arm from the steering box can be problematic because the steering drop arm and the steering box splines corrode together. This tool solves that problem. Supplied with a spare threaded bar.
Trim Clips Kit (DA6641)
Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box.
Contents
35 x Rivet - AFU1075
15 x Trim fastener - ANR2224
15 x Scrivet - DYQ100230
15 x Scrivet - AWR3994
15 x Scrivet - DYQ100320
25 x Finisher clip - DYC101420
20 x Stud door casing - MWC9134
20 x Stud door casing - blue - MWC9134BLUE
20 x Fastener - MXC1800
60 x Snapsac - MWC3136
25 x Door casing stud - DKP5279L
15 x Fir tree roof insulation retainer - DA1634Air Suspension Calibration Blocks (LRT-60-003)
To be used in conjunction with Lynx diagnostics kit.
Laser Fuel Pump Locking Tool (DA6120)
For use with DA1120
Crankshaft Seal Tool (DA1161)
For removing and installing crankshaft seal.
Equivalent to OEM - 303-679.
Prop Shaft Nut Tool - 3/8” Square Drive (DA1065)
- Drive: 3/8” square drive
- Size: 9/16" 6 point (Hexagon)
- Total length: 150mm
- Outside diameter: 20mm
Specialist socket for prop shaft fasteners on most Land Rovers.
The 9/16" socket end is a perfect hexagon with rounded tip profiles to ensure the whole turning power is transferred onto the flanks of the nuts instead of on the corners. The socket's slim wall construction and wine glass profile, coupled to an integral slimline extension means it fits perfectly between the UJ yokes and over the prop shaft nuts without fouling.The 9/16" AF nuts are common to Series Land Rovers, Defenders (90 & 110 up to latest vehicles), Discoverys (up to and including Discovery 2) and Range Rovers (up to and including P38).
Prop Shaft Nut Tool - 1/2" Square Drive (DA1119)
- Drive: 1/2" square drive
- Size: 9/16" 6 point (Hexagon)
- Total length: 150mm
- Outside diameter: 20mm
Specialist socket for prop shaft fasteners on most Land Rovers.
The 9/16" socket end is a perfect hexagon with rounded tip profiles to ensure the whole turning power is transferred onto the flanks of the nuts instead of on the corners. The socket's slim wall construction and wine glass profile, coupled to an integral slimline extension means it fits perfectly between the UJ yokes and over the prop shaft nuts without fouling.The 9/16" AF nuts are common to Series Land Rovers, Defenders (90 & 110 up to latest vehicles), Discoverys (up to and including Discovery 2) and Range Rovers (up to and including P38).
Fuel Injector Locking Tool (DA1235)
Laser Oil Pump Alignment Tool (DA6111)
Developed to correctly align the engine oil pump in the sump after an engine rebuild. It is important that the pump is correctly and accurately aligned to ensure the oil pump sprocket is not operating with excessive side loads.
Ball Joint Fitment & Removal Tool (DA1125)
Fit & remove RBG000010 to a Defender drop arm without having to remove the arm from the vehicle.
Panel Popper Tool Kit (DA1155)
Designed to aid in the easy removal of door trim panels, trim fasteners and mouldings inside or outside the vehicle.
Tools manufactured from a tough & durable engineering plastic to minimise panel damage. Includes an additional metal clip tool.
Supplied in roll-up fabric case.
Laser Cooling System Pressure Test Kit (DA6132)
A comprehensive cooling system pressure testing kit for universal use.
24 pieces including:
- 16 individually sized adaptors
- Pressure testing pump with gauge
- 2 pressure cap test connectors for use with No 3 adaptor and handle.
- Application list and instructions included.
- Checks the leakage on original radiator cap. The pressure pump is hand operated and is fitted with an accurate and easy to read gauge marked in both psi and bar. This kit includes a thermometer to aid diagnostics and also ensure the system is cool before removing the cap. Also included in this kit is a very useful radiator pressure cap tester.
Wing Protectors (DA5631)
Protect your Defender's wings with a pair of these sturdy, easy to fit protectors.
Laser Gearbox/Axle Filler Pump (DA7477)
- This handy mini pump makes all top up jobs easy.
- Ideal for gear boxes and differentials and is suitable for oils, automatic transmission fluids, brake fluids and general purpose cleaners.