Fuel Tank, Steering/Sump & Transmission Guards
Added protection from those hidden dangers when off-roading!
Parts
Galvanised Fuel Tank Cradle (DA5208)
Galvanised Fuel Tank Cradle (DA5209)
Safety Devices Stepped Non-Winch Steering Guard (DA3802)
Powder coated steel mounting brackets and aluminium steering guard plate. Can only be fitted when Safety Devices Stepped Non-Winch Front Bumper (DA3801) has been installed.
Safety Devices Stepped Winch Steering Guard (DA3804)
Powder coated steel mounting brackets and aluminium steering guard plate. Can only be fitted when Safety Devices Stepped Winch Front Bumper (DA3803) has been installed.
Front Undershield (VPLEP0436LR)
- Robust, 5mm anodised aluminium.
- Protects lower bumper area and radiator when driving off-road.
- The undershield is also reinforced by the mounting assembly which enhances the protection.
- Allows easy access to the recovery loop which facilitates recovery of the vehicle if grounded.
Sump Guard (DA7530)
An essential purchase for any off road use.
An essential purchase for any off road use as they prevent damage to the underside of the engine and the intercooler at the front of the vehicle. Manufactured from 8mm 5083 aluminium with a smart matt finish and supplied completely machined and drilled ready to bolt directly to the 4 pre-drilled holes in the chassis with supplied galvanised fixings. The guard requires no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fitting should take 5 minutes.
Sump Guard (DA7530B)
An essential purchase for any off road use.
An essential purchase for any off road use as they prevent damage to the underside of the engine and the intercooler at the front of the vehicle. Manufactured from 8mm 5083 aluminium with a smart black finish and supplied completely machined and drilled ready to bolt directly to the 4 pre-drilled holes in the chassis with supplied galvanised fixings. The guard requires no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fitting should take 5 minutes.
Sump Guard (DA7535)
An essential purchase for any off road use.
An essential purchase for any off road use as they prevent damage to the underside of the engine and the intercooler at the front of the vehicle. Manufactured from 8mm 5083 aluminium with a smart matt finish and supplied completely machined and drilled ready to bolt directly to the 4 pre-drilled holes in the chassis with supplied galvanised fixings. The guard requires no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fitting should take 5 minutes.
Sump Guard (DA7535B)
An essential purchase for any off road use.
An essential purchase for any off road use as they prevent damage to the underside of the engine and the intercooler at the front of the vehicle. Manufactured from 8mm 5083 aluminium with a smart black finish and supplied completely machined and drilled ready to bolt directly to the 4 pre-drilled holes in the chassis with supplied galvanised fixings. The guard requires no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fitting should take 5 minutes.
Transmission Guard (DA5625)
Bolts on and is easy to fit!
Reduce damage to your 90! Made from galvanised steel, this transmission guard protects your Defender 90's gearbox and cross members from snagging and reduces damage to your vehicle. Bolts on and is easy to fit and importantly it is also easy to remove when your vehicle needs servicing.
Only fits with centre exhaust removed and pipe fitted.Steering/Sump Guard (DA5507)
Added protection from those hidden dangers when off-roading!
This guard from Britpart is manufactured from high-quality, hard-wearing and corrosion resistant material to counteract any unforeseen obstacles your Land Rover may encounter whilst off-roading. All fixings are supplied and the guard fits into the vehicle's pre-existing holes. The guard has holes at the front to allow for water drainage and also to help with ventilation for the cooling system.
Main plate - 8mm thick / Brackets - 8mm thick
Steering/Sump Guard (DA5507LHD)
Added protection from those hidden dangers when off-roading!
This guard from Britpart is manufactured from high-quality, hard-wearing and corrosion resistant material to counteract any unforeseen obstacles your Land Rover may encounter whilst off-roading. All fixings are supplied and the guard fits into the vehicle's pre-existing holes. The guard has holes at the front to allow for water drainage and also to help with ventilation for the cooling system.
Main plate - 8mm thick / Brackets - 8mm thick
Steering/Sump Guard (DA5508)
Added protection from those hidden dangers when off-roading!
This guard from Britpart is manufactured from high-quality, hard-wearing and corrosion resistant material to counteract any unforeseen obstacles your Land Rover may encounter whilst off-roading. All fixings are supplied and the guard fits into the vehicle's pre-existing holes. The guard has holes at the front to allow for water drainage and also to help with ventilation for the cooling system.
Main plate - 8mm thick / Brackets - 8mm thick
Steering/Sump Guard (DA2249)
Added protection from those hidden dangers when off-roading!
This guard from Britpart is manufactured from high-quality, hard-wearing and corrosion resistant material to counteract any unforeseen obstacles your Land Rover may encounter whilst off-roading. All fixings are supplied and the guard fits into the vehicle's pre-existing holes. The guard has holes at the front to allow for water drainage and also to help with ventilation for the cooling system.
Main plate - 5mm thick / Brackets - 5mm thick with powder coat finish
Note - For use with Discovery 2 winch bumper DA5645
Transmission Plate (DA7532)
DA7532 shown with DA7536 also fitted.This transmission plate protects the underside of the transmission and allow the car to slide over objects. With a natural finish the plate is made from 6mm 5083 grade aluminium and water jet cut to a precise finish. Plate bolts directly into existing holes and bulkheads already in the chassis, using the standard Land Rover fixings and two additional fixings.
Note - Can only be fitted when sump plate DA7536 is also fitted.
Sump Plate (DA7536)
Added protection from those hidden dangers when off-roading!
DA7536 shown with DA7532 also fitted. This sump plate protects the underside of the engine and allows the car to slide over objects, forward and backwards due the rear lip. With a natural finish the plate is made from 6mm 5083 grade aluminium and has been water jet cut to a precise finish. Plate bolts directly into existing holes and bulkheads already in the chassis, using the standard Land Rover fixings.
Fuel Tank Guard (DA6538)
Protect your Defender’s fuel tank with one of these guards. Manufactured from 6mm aluminium.
Note - May not be compatible with other accessories fitted to the vehicle such as towbars.
Fuel Tank Guard (DA6539)
Protect your Defender’s fuel tank with one of these guards. Manufactured from 6mm aluminium.
Note - May not be compatible with other accessories fitted to the vehicle such as towbars.
Steering/Sump Guard Fitting Kit (DA5507KIT)
