Electronic Fan Conversion Kits
Revotec custom engineering to fit and cool your Land Rover perfectly.
Parts
Revotec Electronic Fan Conversion Kit (DA8976)
Revotec cooling kits undergo a rigorous development which includes, radiator air flow performance testing at COMEX to ensure the fan(s) used outperform the original setup. The final stage is extensive road testing before release. The latest fan and controller technology used together with vehicle specific fan mounting brackets, for the ultimate cooling package.
Range Rover Classic Cooling Kits Contain:
A Revotec Fan Controller, 2 x 13” High Power Suction Fans & Laser Cut BracketsRevotec Electronic Fan Controller
- Adjustable temperature range of 70 - 120ºC
- Instant response
- No interruption to water flow
- Simple to install with no leaks!
- Only 3 wires to connect
COMEX Electric Fan
- Lightweight, slimline body
- Low noise
- Finger guard
- Balanced blades
- High output, long-life design
- Rated to run continuously
- Waterproofed to IP68
Fan Mounting Kit
- No permanent modifications required
- Vehicle specific brackets
- Laser cut
- Engineered to fit perfectly
- Fitting kit which includes all necessary fittings
Revotec Electronic Fan Conversion Kit (DA8977)
Revotec cooling kits undergo a rigorous development which includes, radiator air flow performance testing at COMEX to ensure the fan(s) used outperform the original setup. The final stage is extensive road testing before release. The latest fan and controller technology used together with vehicle specific fan mounting brackets, for the ultimate cooling package.
Range Rover Classic Cooling Kits Contain:
A Revotec Fan Controller, 2 x 13” High Power Suction Fans & Laser Cut BracketsRevotec Electronic Fan Controller
- Adjustable temperature range of 70 - 120ºC
- Instant response
- No interruption to water flow
- Simple to install with no leaks!
- Only 3 wires to connect
COMEX Electric Fan
- Lightweight, slimline body
- Low noise
- Finger guard
- Balanced blades
- High output, long-life design
- Rated to run continuously
- Waterproofed to IP68
Fan Mounting Kit
- No permanent modifications required
- Vehicle specific brackets
- Laser cut
- Engineered to fit perfectly
- Fitting kit which includes all necessary fittings
Revotec Electronic Fan Conversion Kit (DA8978)
Revotec cooling kits undergo a rigorous development which includes, radiator air flow performance testing at COMEX to ensure the fan(s) used outperform the original setup. The final stage is extensive road testing before release. The latest fan and controller technology used together with vehicle specific fan mounting brackets, for the ultimate cooling package.
Range Rover Classic Cooling Kits Contain:
A Revotec Fan Controller, 2 x 13” High Power Suction Fans & Laser Cut BracketsRevotec Electronic Fan Controller
- Adjustable temperature range of 70 - 120ºC
- Instant response
- No interruption to water flow
- Simple to install with no leaks!
- Only 3 wires to connect
COMEX Electric Fan
- Lightweight, slimline body
- Low noise
- Finger guard
- Balanced blades
- High output, long-life design
- Rated to run continuously
- Waterproofed to IP68
Fan Mounting Kit
- No permanent modifications required
- Vehicle specific brackets
- Laser cut
- Engineered to fit perfectly
- Fitting kit which includes all necessary fittings
Revotec Electronic Fan Conversion Kit (DA8970D)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Fan Override Switch (DA8974)
3 -way rotary switch for use with a Revotec fan controller enabling the fan to be manually controlled either on, off or automatic.
Perfect for 4x4 applications such as wading.
This product must be used with a Revotec electronic fan controller.
Kit contains - Black anodised mounting bracket kit. Position decal. Sealed 3m wiring loom and connection diagram.
Revotec Electronic Fan Conversion Kit (DA8963)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 14” (350mm) High Power Blowing fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Electronic Fan Conversion Kit (DA8964)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
2 x 12” (305mm) High Power Sucking fans
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Electronic Fan Conversion Kit (DA8965)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Electronic Fan Conversion Kit (DA8966)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
2 x 12” (305mm) High Power Sucking fans
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Electronic Fan Conversion Kit (DA8967)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Electronic Fan Conversion Kit (DA8968)
Kit Contents:
1 x 35mm Revotec Land Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Retrofit Mounting Shroud
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Electronic Conversion Kit (DA8970P)
Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & InstructionsBenefits of fitting an electric fan:
- Engine reaches operating temperature quickly, reducing wear.
- Sufficient cooling when needed i.e. sitting in traffic idling.
- Overcome hotter running caused by modern fuel.
- Increased performance.
- Improved fuel economy.
- Reduced load on engine.
What makes Revotec products unique:
- Quality- Fan Controller made to do the job, manufactured in the UK.
- Retrofitted without any modification, keeping vehicle originality.
- High quality OEM parts and components used throughout.
- Each kit contains vehicle specific brackets designed to fit without permanent modification.
- Each kit has been developed to give an OEM fit and appearance.
- Each kit consists of a controller, fan(s) and all necessary mounting hardware.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving a more accurate temperature reading.
Revotec Air Conditioning Fans (DA8971)
This is a direct replacement to the vehicles original air conditioning fan.
Revotec Air Conditioning Fans (DA8972)
This is a direct replacement for OEM Part No. JRP100000
Kit contains - 1 x 12; high power blowing fan, 2 x anodised brackets & 1 x fixing kit
Revotec Electronic Fan Controller (DA8973)
Kit Contents:
1 x Revotec Land Rover Electric Fan Controller
To fit 35mm ID Hose
Extended Power Lead
All necessary mounting hardware & InstructionsThe Revotec Electronic Fan Controller
Easy to install and adjust, the Revotec adjustable temperature electric fan controller firmly mounts into a coolant hose with no chance of leaks. Manufactured in Aluminium is always in contact with the water, without restriction.Each controller is supplied with a relay loom and all necessary fittings.
- Adjustable from 70°-120°C (158°-248°F) with the turn of a screw.
- Will work with any DC fan(s) currently on the market.
Revotec Electronic Fan Controller vs probe type mechanical switch:
- No leaks - A capillary device is prone to poor sealing
- The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
- No restriction of coolant flow.
- Always in contact with the water - giving more accurate temperature reading